Access to the Accessories!!

Enymod : Mi Distribution Boards Accesories

Earlier, you had read in our blogs about the innovative range of Mi Distributions Boards which makes an electrical panel assembly so safe and quick, that it reduces the downtime of the plant and enhances safety to the premises.

For those who couldnt catch up with us on this interesting product, you can still have a go on the article by following and copy- pasting the link ( http://henselelectric.blogspot.in/2010/12/enymod-quick-and-easy-modular-mi-panel.html)

We also are pleased to offer you a video presentation on the unique modular concept of MI system as under;

Today we would like to appraise you with the unique accessories that makes your job easier when you think about using the modular concept from Hensel. Ofcourse, you need not worry on ordering all these accessories as in any case, they form a part of our product solutions. If you believe in package offers, Hensel  can be a one-stop solution as we offer Type tested Thermoplastic panel systems upto 1000A.

Some of the accessories to make your life simpler during assemblies are;

• Bus Bars and their supports

Hensel offers exclusive range of Copper Bus bars and  the range starts from 250 A upto 630A. The Bus bars are supplied with a standard length of 2400mm with standard sizes of 12x5mm, 12x10mm, 20x10m, 25x10mm and 30x10mm

Bus Bar supports as shown in the above picture are available to carry bus bars from one enclosure to the other retaining the required spacing and insulation. Extension of bus bars is easily possible as extension terminals for bus bars are available as shown in the picture below.

• Terminals for direct bus bar connections

Terminals supplied by Hensel are special as there is no need to drill holes on the bus bars and as a result there are no weak points for a flash over to occur. These terminals are suitable for Solid, Stranded, flexible copper conductors with gas-tight crimped end sleeve and for laminated wiring strip. The terminals get snap fitted on the copper bus bar and are available in accordance with cable sizes, bus bar sizes and as per ratings. In case Aluminium conductors are used at the outgoing side from the bus bars, they need to be prepared to connection in accordance with the relevant technical recommendations. The range starts from 1.5sqmm up to 300sqmm Copper  / Aluminium conductors. Width of the bus bars range from 11mm up to 38mm.

• Wiring Strips / Flexible wiring Band 

For the ease of connection of the main breakers of the panel to the solid copper bus bar, wiring strips are handy. Conventionally Bus bars are bent and drilled for such type of connections however Hensel makes it simpler for a user by the introduction of these flexible strips. The number of strips  / sheets of copper used inside the wiring bad range from 3 to 11nos with a thickness of 0.8mm upto 1mm per strip.The ratings are available as per the solid bus bars used.

• Wall Gasket

A very useful and convenient of retaining the high IP65 rating when using Modular combinable enclosure systems. This PUR gasket is extensively used in the Hensel Mi panel systems  for its assembly. The gaskets are used for combining boxes having a combining wall of 150mm or 300mm and is supplied along with 1 seal, 4 wedge links and 1 bracket. A picture illustrated as under can explain better;

• Cable Entry Flanges

Even though the Mi system enclosure have a number of pre-moulded knock-outs for cable entry for any user, he might still have a customised requirement and hence we have a host of cable entry flanges that will suit every user. The flanges range from low sized knockouts of 12mm and go upto a very large size of 70mm diameter of the cables.

In case, the user wants to drill holes at site as per his convenience, the cable entry flange as illustrated in the below picture makes it convenient for him.

Countries like India, Malaysia or the Middle East predominantly use Aluminium armored cables and users in these countries always need to ensure the armor continuity for the cables. With constant dialogues with customers in these countries, Hensel has now been able to offer solution to these problems with simple cable entry flange plates which goes together with the plain flange. As the products are completely insulated, this metallic plate introduced by us ensure the continuity of the Armor or in other other words Earthing connections are fulfilled.

 When the requirement of the size of the cable increases, the cable flanges are to be designed to handle it. Hensel offers special flanges that can take a maximum of 300sqmm cables inside the panels as under;

These cable flanges are available also with an extra accessory called the cable strain relief and is generally required to ensure there are no stresses on the panel. 

The cable strain relief hold the incoming  / outgoing cables after they are inserted into the panel system via the cable entry flanges. Any strain or pull from the field is eliminated due to this special accessory.

There are many more such useful and innovative accessories that can be used inside the Hensel Panel systems. If you are a panel builder, an Industrial maintenance person, a consultant, you know the issues with the conventional panels being used. Do have a look at our unique range of systems and if you need more details or technical session with our engineers, do let us know by simply shooting an email to us on info@hensel-electric.in